View B141EW03-VB_7772777.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 1/35 ( ) preliminary specifications ( v ) final specifications module 14.1? wxga color tft-lcd model name b141ew03 vb (qd14tl01 rev.04) customer date checked & approved by note: this specification is subject to change without notice. approved by date prepared by beyond yang 1/10/2007 mdbu marketing division / au optronics corporation www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 2/35 contents 1. handling precauti ons ........................................................................................................ ...... 4 2. general descrip tion......................................................................................................... ........ 5 2.1 display char acteristics .................................................................................................... .. 5 2.2 optical char acteristics .................................................................................................... ... 6 3. functional bl ock diag ram.................................................................................................... .11 4. absolute m aximum ra tings.................................................................................................. 12 4.1 tft l cd modul e............................................................................................................. . 12 4.2 backli ght un it ............................................................................................................. ...... 12 4.3 absolute ratings of envi ronment ..................................................................................... 12 5. electrical ch aracteristics.................................................................................................. ..... 13 5.1 tft l cd modul e............................................................................................................. . 13 5.2 backli ght un it ............................................................................................................. ...... 15 6. signal char acteristic ....................................................................................................... ...... 17 6.1 pixel fo rmat image......................................................................................................... . 17 6.2 the input data fo rmat ...................................................................................................... . 18 6.3 signal de scripti on ......................................................................................................... ... 19 6.4 interfac e timi ng ........................................................................................................... .... 21 6.5 power on/o ff sequenc e ............................................................................................... 22 7. connector & pi n assignm ent ............................................................................................... 23 7.1 tft l cd modul e............................................................................................................. . 23 7.2 backli ght un it ............................................................................................................. ...... 23 7.3 signal for lam p connecto r ............................................................................................... 23 8. vibration a nd shock test.................................................................................................... .. 24 8.1 vibrat ion te st ............................................................................................................. ...... 24 8.2 shock te st spec: ........................................................................................................... .. 24 9. reliability................................................................................................................. ............... 25 10. mechanical character istics................................................................................................. 26 10.1 lcm outli ne dimensio n ................................................................................................. 26 10.2 screw hole depth and center po sition .......................................................................... 28 11. shipping and p ackage ....................................................................................................... .. 29 11.1 shipping label forma t ................................................................................................... 29 11.2. cart on pack age........................................................................................................... .. 30 11.3 shipping package of palletizing sequence ..................................................................... 30 12. appendix: edid descrip tion ............................................................................................... 31 www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 3/35 record of revision version and date page old description new d escription remark 0.1 2006/12/14 all first edition for customer 1.0 2007/1/10 preliminary version final version www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 4/35 1. handling precautions 1) since front polarizer is easily dam aged, pay attention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long c ontact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at t he back of the module to any directions. 9) in case if a module has to be put back in to the packing container slot after once it was taken out from the cont ainer, do not press the center of the ccfl reflector edge. instead, press at the far ends of t he cfl reflector edge softly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module in to an enclosure (notebook pc bezel, for example), do not twist nor bend the tft modul e even momentary. at designing the enclosure, it should be taken into consider ation that no bending/twisting forces are applied to the tft module fr om outside. otherwise the tft module may be damaged. 12) cold cathode fluorescent lamp in lcd contai ns a small amount of mercury. please follow local ordinances or regulations for disposal. 13) small amount of materials having no flamm ability grade is used in the lcd module. the lcd module should be supplied by power comp lied with requirements of limited power source (, iec60950 or ul1950), or be applied exemption. 14) the lcd module is designed so that the ccfl in it is supplied by limited current circuit (iec60950 or ul1950). do not connect the ccfl in hazardous voltage circuit. www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 5/35 2. general description b141ew03 vb(qd14tl01 rev.04) is a color active matrix liquid crystal display composed of a tft lcd panel, a driver circuit, and backlight system. the screen format is intended to support the wxga (1280(h) x 800(v)) screen and 262k colors (rgb 6-bits data driver). all input signals are lvds interface compatible. inverter of backlight is not included. b141ew03 vb(qd14tl01 rev.04) is designed for a display unit of notebook style personal computer and industrial machine. 2.1 general specification the following items are characteri stics summary on the table at 25 condition: items unit specifications screen diagonal [mm] 358.1 (14.1 w?) active area [mm] 303.74 (h) x 189.84 (v) pixels h x v 1280 x 800 pixel pitch [mm] 0.2373 x 0.2373 pixel arrangement r.g.b. vertical stripe display mode normally white white luminance (i ccfl =6.0ma) note: i ccfl is lamp current [cd/m 2 ] 220 typ. (5 points average) 190 min. (5 points average) ( note1 ) luminance uniformity 1.25 max. (5 points) contrast ratio 400 typ /300 min., optical rise time/fall time [msec] 25 typ. nominal input voltage vdd [volt] +3.3 typ. power consumption [watt] 5.7 max.(without inverter) weight [grams] 440 max(without inverter) ph y sical size [mm] 320 max. ( w ) x 206 max. ( h ) x 5.5 max. electrical interface 1 channel lvds surface treatment anitglar e (ag45%), hardness 3h, support color 262k colors ( rgb 6-bit ) temperature range operating storage (non-operating) [ o c] [ o c] 0 to +50 -20 to +60 rohs compliance rohs compliance www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 6/35 2.2 optical characteristics the optical characteristics are m easured under stable conditions at 25 (room temperature): item unit conditions min. typ. max. note white luminance i ccfl =6.0ma [cd/m 2 ] 5 points average 190 220 - 1, 4, 5. [degree] [degree] horizontal (right) cr = 10 (left) 40 40 45 45 - - viewing angle [degree] [degree] vertical (upper) cr = 10 (lower) 10 30 25 35 - - 8 luminance uniformity 5 points 1.25 1 luminance uniformity 13 points 1.61 2 cr: contrast ratio 300 400 - 6 cross talk % 4 7 [msec] rising - 8 10 [msec] falling - 16 25 response time [msec] rising + falling 25 35 8 red x 0.545 0.575 0.605 red y 0.295 0.325 0.355 green x 0.280 0.310 0.340 green y 0.525 0.555 0.585 blue x 0.125 0.155 0.185 blue y 0.115 0.145 0.175 white x 0.283 0.313 0.343 color / chromaticity coordinates (cie 1931) white y 0.299 0.329 0.359 2,8 note 1: 5 points position (displ ay area : 303.74 (h) x 189.84 (v)mm) www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 7/35 1 2 3 4 5 h/4 h/4 h/4 h/4 h w w/4 w/4 w/4 w/4 note 2: 13 points position w/4 w w/4 h h/4 h/4 h/4 h/4 7 9 10 w/4 1 8 w/4 10 10 10 10 2 3 13 12 4 5 6 11 note 3: the luminance uniformity of 5 and 13 points is defined by dividing the maximum luminance values by the minimum test point luminance w13 = maximum brightness of thirteen points minimum brightness o f thirteen points maximum brightness of five points w5 = minimum brightness of five points www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 8/35 note 4: measurement method the lcd module should be stabilized at given temperat ure for 30 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 30 minutes in a stable, windless and dark room. note 5 definition of average luminance of white (y l ): measure the luminance of gray level 63 at 5 points y l = [l (1)+ l (2)+ l (3)+ l (4)+ l (5)] / 5 l (x) is corresponding to the luminance of the point x at figure in note (1). note 6 definition of contrast ratio: contrast ratio is calculated with the following formula. center of the screen tft - lcd module 50 cm photo detector lcd panel field=2 contrast ratio ( cr ) = bri g htness on the ?white? state bri g htness on the ?black? state www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 9/35 note 7 definition of cross talk (ct) ct = | y b ? y a | / y a 100 (%) where y a = luminance of measured location without gray level 0 pattern (cd/m 2 ) y b = luminance of measured location with gray level 0 pattern (cd/m 2 ) note 8: definition of response time: the output signals of bm-7 or equivalent are measur ed when the input signals are changed from ?black? to ?white? (falling time) and from ?white? to ?black? (rising time), respectively. the response time interval between the 10% and 90% of amplitudes. refer to figure as below. "black" t r tf "white" "white" 0 % 10 % 90 % 100 % signal (relative value) www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 10/35 note 8. definition of viewing angle viewing angle is the measurement of contrast ratio R 10, at the screen center, over a 180 horizontal and 180 vertical range (off-normal viewing angles). t he 180 viewing angle range is broken down as follows; 90 ( ) horizontal left and right and 90 ( ) vertical, high (up) and low (down). the measurement direction is typically perpendicular to the display surface wi th the screen rotated about its center to develop the desired measurement viewing angle. www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 11/35 3. functional block diagram the following diagram shows the functional blo ck of the 14.1inches wide color tft/lcd module: tft array/cell vdd lcd controller lcd drive board backlight unit 1280(r/g/b) x 3 x 800 gnd dc-dc converter ref circuit y-driver x-driver rxin0 rxin1 rxin2 rxclkin (4 pairs lvds) jae : fi-xb30sx-hfxx/ fi-x30sx-hfxx mating housing : jae fi-x30h jst:bhsr-02vs-1 mating type:sm02b-bhss-1-tb lam p connector ( 2 p in ) lcd connector ( 30 p in ) www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 12/35 4. absolute maximum ratings absolute maximum ratings of the module is as following: 4.1 absolute ratings of tft lcd module item symbol min max unit conditions logic/lcd drive voltage vin 3 +3.6 [volt] note 1,2 4.2 absolute ratings of backlight unit item symbol min max unit conditions ccfl current iccfl 2.0 6.5 [ma] rms note 1,2 4.3 absolute ratings of environment item symbol min max unit conditions operating temperature top 0 +50 [ o c] note 3 operation humidity hop 5 95 [%rh] note 3 storage temperature tst -20 +65 [ o c] note 3 storage humidity hst 5 95 [%rh] note 3 note 1: at ta (25 ) note 2: permanent damage to the device may occur if exceed maximum values note 3: for quality performance, please refe r to auo iis(incoming inspection standard). twb=39 c operating range storage range www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 13/35 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specificat ions are as follows; symble parameter min typ max units note vdd logic/lcd drive volta g e 3.0 3.3 3.6 [volt] pdd vdd power 1.5 [watt] note 1 idd idd current 400 450 [ma] note 1 i rush inrush current 1500 [ma] note 2 vddrp allowable logic/lcd drive ripple voltage 100 [mv] p-p note 1 : maximum measurement condition black pattern note 2 measure condition q3 ao6402 g d2 s d1 d5 d6 c3 0.01uf/25v c2 1uf/25v c1 1uf/16v q3 ao6402 g d2 s d1 d5 d6 f1 vr1 47k +12.0v vcc sw1 sw mag-spst 1 2 (lcd module input) (high to low) control signal r2 1k r2 1k r1 47k +3.3v 90% 10% vin rising time 0v 3.3v 0.5ms www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 14/35 5.1.2 signal electrical characteristics input signals shall be low or hi gh-impedance state when vdd is off. signal electrical characteristics are as follows; parameter condition min max unit vth differential input high threshold (vcm=+1.2v) 100 [mv] vtl differential input low threshold (vcm=+1.2v) -100 [mv] vcm differential input common mode voltage 1.0 1.5 [v] note: lvds differential voltage www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 15/35 5.2 backlight unit parameter guideline for ccfl inverter parameter min typ max units condition white luminance 5 points average 190 200 - [cd/m 2 ] ( ta=25 ) note 2 ccfl frequency(f ccfl ) 50 80 [khz] (ta=25 ) note 3,4 ccfl ignition voltage(vs) 1500 [volt] rms (ta= 0 ) note 5 ccfl ignition voltage(vs) 1060 [volt] rms (ta= 25 ) note 5 ccfl discharge time(sec) 1 (ta= 25 ) note 1 ccfl voltage (reference) (v ccfl ) 589 655 721 [volt] rms (ta=25 ) note 6 ccfl power consumption (p ccfl ) 3.54 3.93 4.32 [watt] (ta=25 ) note 6 note 1: typ are auo recommended design points. *1 all of characteristics listed are measured under the condition using the auo test inverter. *2 in case of using an inverter other than listed, it is recommended to check the inverter carefully. sometimes, interfering noise stripes appear on the screen, and substandard luminance or flicker at low power may happen. *3 in designing an inverter, it is suggested to check safety circuit very carefully. impedance of ccfl, for instance, becomes more than 1 [m ohm] when cfl is damaged. *4 generally, ccfl has some amount of delay time after applying kick-off voltage. it is recommended to keep on applying kick-off voltage for 1 [sec] until discharge. *5 ccfl discharge frequency must be carefully chosen so as not to produce interfering noise stripes on the screen. *6 reducing ccfl current increases ccfl disc harge voltage and generally increases ccfl discharge frequency. so all the parameters of an inverter s hould be carefully designed so as not to produce too much leakage current from high-voltage output of the inverter. note 2: it should be employed the inverter which has ?duty dimming?, if iccfl is less than 4ma. www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 16/35 note 3: ccfl discharge frequency should be carefully det ermined to avoid interference between inverter and tft lcd. note 4: the frequency range will not affect to lamp life and reliability characteristics. note 5: ccfl inverter should be able to give out a pow er that has a generating capac ity of over 1,430 voltage. lamp units need 1,400 voltage minimum for ignition. note 6: calculator value for reference (i ccfl v ccfl =p ccfl ) note 7: requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp, are following. it shall help increase the lamp lifetime and reduce leakage current. a. the asymmetry rate of the inverter waveform should be less than 10%. b. the distortion rate of the waveform should be within 2 10%. * inverter output waveform had better be more similar to ideal sine wave. www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 17/35 6. signal characteristic 6.1 pixel format image following figure shows the relationship of the input signals and lcd pixel format. r g b r g b r g b r g b r g b r g b r g b r g b 0 1 1278 1279 1st line 800th line www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 18/35 6.2 the input data format signal name description r5 r4 r3 r2 r1 r0 red data 5 (msb) red data 4 red data 3 red data 2 red data 1 red data 0 (lsb) red-pixel data red-pixel data each red pixel's brightness data consists of these 6 bits pixel data. g5 g4 g3 g2 g1 g0 green data 5 (msb) green data 4 green data 3 green data 2 green data 1 green data 0 (lsb) green-pixel data green-pixel data each green pixel's brightness data consists of these 6 bits pixel data. b5 b4 b3 b2 b1 b0 blue data 5 (msb) blue data 4 blue data 3 blue data 2 blue data 1 blue data 0 (lsb) blue-pixel data blue-pixel data each blue pixel's brightness data consists of these 6 bits pixel data. rxclkin data clock the typical frequency is 68.9 mhz.. the signal is used to strobe the pixel data and de signals. all pixel data shall be valid at the falling edge when the de signal is high. de display timing this signal is strobed at the falling edge of rxclkin. when the signal is high, the pixel data shall be valid to be displayed. vs vertical sync the signal is synchronized to rxclkin . hs horizontal sync the signal is synchronized to rxclkin . note: output signals from any system shall be low or high-impedance state when vdd is off. www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 19/35 6.3 signal description/pin assignment lvds is a differential signal technology for l cd interface and high speed data transfer device. pin# signal name description 1 gnd ground 2 vdd +3.3v power supply 3 vdd +3.3v power supply 4 v edid +3.3v edid power 5 nc no connection (reserve for auo test) 6 clk edid edid clock input 7 data edid edid data input 8 rxin0- lvds differential data input(r0-r5, g0) 9 rxin0+ lvds differential data input(r0-r5, g0) 10 gnd ground 11 rxin1- lvds differential data input(g1-g5, b0-b1) 12 rxin1+ lvds differential data input(g1-g5, b0-b1) 13 gnd ground 14 rxin2- lvds differential data input(b2-b5, hs, vs, de) 15 rxin2+ lvds differential data input(b2-b5, hs, vs, de) 16 gnd ground 17 rxclkin- lvds differential clock input 18 rxclkin+ lvds differential clock input 19 gnd ground 20 nc no connection (reserve for auo test) 21 nc no connection (reserve for auo test) 22 gnd ground 23 nc no connection (reserve for auo test) 24 nc no connection (reserve for auo test) 25 gnd ground 26 nc no connection (reserve for auo test) 27 nc no connection (reserve for auo test) 28 nc no connection (reserve for auo test) 29 nc no connection (reserve for auo test) 30 nc no connection (reserve for auo test) www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 20/35 note1: start from right side (must change) note2: input signals shall be low or high-impedance state when vdd is off. internal circuit of lvds inputs are as following. the module uses a 100ohm resistor between positiv e and negative data lines of each receiver input r r r r lvds receiver signal input pin no. 9 11 12 14 15 17 18 8 rxin0+ rxin0- rxin1+ rxin1- rxin2+ rxin2- rxclkin+ rxclkin- 30 1 nc gnd www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 21/35 6.4 interface timing 6.4.1 timing characteristics basically, interface timings should match the 1280x800 /60hz manufacturing guide line timing. parameter symbol min. typ. max. unit frame rate - 50 60 - hz clock frequency 1/ t clock 50 68.9 80 mhz period t v 808 816 832 active t vd 800 800 800 vertical section blanking t vb 8 16 32 t line period t h 1302 1408 1700 active t hd 1280 1280 1280 horizontal section blanking t hb 22 128 420 t clock note : de mode only 6.4.2 timing diagram dotclk de t h t hb t hd de t v t vb t vd input timing definition ( de mode) t clock input data pixel 1 pixel 2 pixel 3 pixel n-1 pixel n invaild data invaild data pixel 1 www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 22/35 6.5 power on/off sequence vdd power and lamp on/off sequence is as follows. interface signals are also shown in the chart. signals from any system shall be hi- z state or low level when vdd is off. power sequence timing value parameter min. typ. max. units t1 0.5 - 10 (ms) t2 0 - 50 (ms) t3 0 - 50 (ms) t4 400 - - (ms) t5 200 - - (ms) t6 200 - - (ms) t7 0 - 10 (ms) t4 t3 t2 t5 valid data t1 10% 90% 10% 90% t6 t7 power supply vdd lvds interface backlight on www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 23/35 7. connector description physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. 7.1 tft lcd module connector name / designation for signal connector manufacturer jae or compatible type / part number fi-xb30sx-hfxx/ fi-x30sx-hfxx or compatible mating housing/part number fi-x30h or compatible 7.2 backlight unit physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. connector name / designation for lamp connector manufacturer jst type / part number bhsr-02vs-1 mating type / part number sm02b-bhss-1-tb 7.3 signal for lamp connector pin # cable color signal name 1 red lamp high voltage 2 white lamp low voltage www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 24/35 8. vibration and shock test 8.1 vibration test test spec: z test method: non-operation z acceleration: 1.5g , sine wave z frequency: 10 - 500hz z sweep: 30 minutes each axis (x, y, z) 8.2 shock test spec: test spec: z test method: non-operation z acceleration: 220 g , half sine wave z active time: 2 ms z pulse: x,y,z .one time for each side www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 25/35 9. reliability items required condition note temperature humidity bias 40 /90%,300hr high temperature operation 50 /dry,300hr low temperature operation 0 ,300hr on/off test 25 , 150hrs(on/10 sec. off/10sec., 10,000 cycles) hot storage 60 /35% rh ,250 hours cold storage -20 /50% rh ,250 hours thermal shock test -20 /30 min ,60 /30 min 100cycles hot start test 50 /1 hr min. power on/off per 5 minutes, 5 times cold start test 0 /1 hr min. power on/off per 5 minutes, 5 times shock test (non-operating) 220g, 2ms, half-sine wave, i time for x, y, z 6 directions vibration test (non-operating) sine-wave vibration, 1.5 g zero-to-peak, 10 to 500 hz, 30 mins in each of three mutually perpendicular axes. esd contact : 8kv/ operation air : 15kv / operation note 1 room temperature test 25 , 2000hours, operating with loop pattern note1: according to en61000-4-2 , esd class b: some performance degradation allowed. no data lost . self-recoverable. no hardware failures. note2: ccfl life time: 10,000 hours minimum under normal module usage. note3: mtbf (excluding the ccfl) : 30,000 hours with a confidence level 90% www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 26/35 10. mechanical characteristics 10.1 lcm outline dimension www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 27/35 www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 28/35 10.2 screw hole depth and center position screw hole maximum depth, from side surface =3.0 mm (see drawing) screw hole center location, from front surface = 3.1 0.3mm (see drawing) screw torque: maximum:1.8 kgf-cm minimum:1.5kgf-cm www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 29/35 11. shipping and package 11.1 shipping label format 11.2 customer label format. www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 30/35 11.2. carton package tape 20 100 20 100 carton 11.3 shipping package of palletizing www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 31/35 12. appendix: edid description address byte field name and comments value value value (decimal) (hex) (hex) (binary) (dec) 0 0 header 00 00000000 0 1 1 header ff 11111111 255 2 2 header ff 11111111 255 3 3 header ff 11111111 255 4 4 header ff 11111111 255 5 5 header ff 11111111 255 6 6 header ff 11111111 255 7 7 header 00 00000000 0 8 8 eisa manufacture code = 3 character id 06 00000110 6 9 9 eisa manufacture code (compressed ascii) af 10101111 175 10 0a panel supplier reserved ? product code 44 01000100 68 11 0b panel supplier reserved ? product code 3b 00111011 59 12 0c lcd module serial no - preferred but optional (?0? if not used) 00 00000000 0 13 0d lcd module serial no - preferred but optional (?0? if not used) 00 00000000 0 14 0e lcd module serial no - preferred but optional (?0? if not used) 00 00000000 0 15 0f lcd module serial no - preferred but optional (?0? if not used) 00 00000000 0 16 10 week of manufacture 01 00000001 1 17 11 year of manufacture 10 00010000 16 18 12 edid structure version # = 1 01 00000001 1 19 13 edid revision # = 3 03 00000011 3 20 14 video i/p definition = digital i/p (80h) 80 10000000 128 21 15 max h image size = (rounded to cm) 1e 00011110 30 22 16 max v image size = (rounded to cm) 13 00010011 19 23 17 display gamma = (gamma 100)-100 = example: ( 2.2100 ) ? 100 = 120 78 01111000 120 24 18 feature support ( no dpms, active off, rgb, timing blk 1) 0a 00001010 10 25 19 red/green low bit (rxry/gxgy) 87 10000111 135 www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 32/35 26 1a blue/white low bit (bxby/wxwy) f5 11110101 245 27 1b red x rx = 0.xxx 94 10010100 148 28 1c red y ry = 0.xxx 57 01010111 87 29 1d green x gx = 0.xxx 4f 01001111 79 30 1e green y gy = 0.xxx 8c 10001100 140 31 1f blue x bx = 0.xxx 27 00100111 39 32 20 blue y by = 0.xxx 27 00100111 39 33 21 white x wx = 0.xxx 50 01010000 80 34 22 white y wy = 0.xxx 54 01010100 84 35 23 established timings 1 (00h if not used) 00 00000000 0 36 24 established timings 2 (00h if not used) 00 00000000 0 37 25 manufacturer?s timings (00h if not used) 00 00000000 0 38 26 standard timing id1 (01h if not used) 01 00000001 1 39 27 standard timing id1 (01h if not used) 01 00000001 1 40 28 standard timing id2 (01h if not used) 01 00000001 1 41 29 standard timing id2 (01h if not used) 01 00000001 1 42 2a standard timing id3 (01h if not used) 01 00000001 1 43 2b standard timing id3 (01h if not used) 01 00000001 1 44 2c standard timing id4 (01h if not used) 01 00000001 1 45 2d standard timing id4 (01h if not used) 01 00000001 1 46 2e standard timing id5 (01h if not used) 01 00000001 1 47 2f standard timing id5 (01h if not used) 01 00000001 1 48 30 standard timing id6 (01h if not used) 01 00000001 1 49 31 standard timing id6 (01h if not used) 01 00000001 1 50 32 standard timing id7 (01h if not used) 01 00000001 1 51 33 standard timing id7 (01h if not used) 01 00000001 1 52 34 standard timing id8 (01h if not used) 01 00000001 1 53 35 standard timing id8 (01h if not used) 01 00000001 1 54 36 pixel clock/10,000 (lsb) c7 11000111 199 55 37 pixel clock/10,000 (msb) 1b 00011011 27 56 38 horizontal active = 1280 pixels (lower 8 bits) 00 00000000 0 57 39 horizontal blanking (thbp) = 160 pixels (lower a0 10100000 160 www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 33/35 8 bits) 58 3a horizontal active/horizontal blanking (thbp) (upper4:4 bits) 50 01010000 80 59 3b vertical active = 800 lines 20 00100000 32 60 3c vertical blanking (tvbp) = 23 lines (de blanking typ. for de only panels) 17 00010111 23 61 3d vertical active : vertical blanking (tvbp) (upper4:4 bits) 30 00110000 48 62 3e horizontal sync, offset (thfp) = 48 pixels 30 00110000 48 63 3f horizontal sync, pulse width = 32 pixels 20 00100000 32 64 40 vertical sync, offset (tvfp) = 3 lines sync width = 6 lines 36 00110110 54 65 41 horizontal vertical sync offset/width upper 2 bits 00 00000000 0 66 42 horizontal image size =304 mm 30 00110000 48 67 43 vertical image size = 190 mm be 10111110 190 68 44 horizontal image size / vertical image size 10 00010000 16 69 45 horizontal border = 0 (zero for notebook lcd) 00 00000000 0 70 46 vertical border = 0 (zero for notebook lcd) 00 00000000 0 71 47 non-interlaced, normal, no st ereo, separate sync, h/v pol negatives, de only note: lsb is set to ?1? if panel is de-timing only. h/v can be ignored. 19 00011001 25 72 48 pixel clock/10,000 (lsb) 26 00100110 38 73 49 pixel clock/10,000 (msb) 17 00010111 23 74 4a horizontal active = xxxx pixels (lower 8 bits) 00 00000000 0 75 4b horizontal blanking (thbp) = xxxx pixels (lower 8 bits) a0 10100000 160 76 4c horizontal active/horizontal blanking (thbp) (upper4:4 bits) 50 01010000 80 77 4d vertical active = xxxx lines 20 00100000 32 78 4e vertical blanking (tvbp) = xxxx lines (de blanking typ. for de only panels) 17 00010111 23 79 4f vertical active : vertical blanking (tvbp) (upper4:4 bits) 30 00110000 48 www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 34/35 80 50 horizontal sync, offset (thfp) = xxxx pixels 30 00110000 48 81 51 horizontal sync, pulse width = xxxx pixels 20 00100000 32 82 52 vertical sync, offset (tvfp) = xx lines sync width = xx lines 36 00110110 54 83 53 horizontal vertical sync offset/width upper 2 bits 00 00000000 0 84 54 horizontal image size =xxx mm 30 00110000 48 85 55 vertical image size = xxx mm be 10111110 190 86 56 horizontal image size / vertical image size 10 00010000 16 87 57 horizontal border = 0 (zero for notebook lcd) 00 00000000 0 88 58 vertical border = 0 (zero for notebook lcd) 00 00000000 0 89 59 module ?a? revision = example: 00, 01, 02, 03, etc. 00 00000000 0 90 5a flag 00 00000000 0 91 5b flag 00 00000000 0 92 5c flag 00 00000000 0 93 5d dummy descriptor fe 11111110 254 94 5e flag 00 00000000 0 95 5f dell p/n 1 st character (g) 47 01000111 71 96 60 dell p/n 2 nd character (m) 4d 01001101 77 97 61 dell p/n 3 rd character (5) 35 00110101 53 98 62 dell p/n 4 th character (2) 32 00110010 50 99 63 dell p/n 5 th character (1) 31 00110001 49 100 64 lcd supplier eedid revision # 00 00000000 0 101 65 manufacturer p/n 42 01000010 66 102 66 manufacturer p/n 31 00110001 49 103 67 manufacturer p/n 34 00110100 52 104 68 manufacturer p/n 31 00110001 49 105 69 manufacturer p/n 45 01000101 69 106 6a manufacturer p/n 57 01010111 87 107 6b manufacturer p/n (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 33 00110011 51 108 6c flag 00 00000000 0 109 6d flag 00 00000000 0 110 6e flag 00 00000000 0 111 6f data type tag: fe 11111110 254 www.datasheet.co.kr datasheet pdf - http://www..net/
au optronics corporation b141ew03 vb (qd14tl01 rev.04) product specification document version 0.1 35/35 112 70 flag 00 00000000 0 113 71 smbus value = xx nits 27 00100111 39 114 72 smbus value = xx nits 35 00110101 53 115 73 smbus value = xx nits 41 01000001 65 116 74 smbus value = xx nits 48 01001000 72 117 75 smbus value = xx nits 66 01100110 102 118 76 smbus value = xxx nits 85 10000101 133 119 77 smbus value = xxx nits ab 10101011 171 120 78 smbus value = max nits (typically = 00h, xxx nits) ff 11111111 255 121 79 number of lvds receiver chips = ?01? or ?02? 01 00000001 1 122 7a bist enable: yes = ?01? no = ?00? 01 00000001 1 123 7b (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 0a 00001010 10 124 7c (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 32 125 7d (if <13 char, then terminate with ascii code 0ah, set remaining char = 20h) 20 00100000 32 126 7e extension flag (# of optional 128 edid extension blocks to follow, typ = 0) 00 00000000 0 127 7f checksum (the 1-byte sum of all 128 bytes in this edid block shall = 0) c3 11000011 195 www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of B141EW03-VB

	To Download B141EW03-VB Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .